إتقان عيوب الصب: دليل شامل لأكثر 6 مشاكل المسبك شيوعًا
In metal casting, a defect is rarely just a “minor glitch.” It is a critical variable that dictates yield rates, production costs, and delivery schedules. While floor issues may seem complex, they usually boil down to a few high-frequency categories. For engineers, quality inspectors, and production staff, the goal isn’t just to memorize definitions—it’s to identify the features, diagnose the root causes, and implement corrective actions. This guide provides a concise breakdown of the 6 most common casting defects every foundry should control: Blowholes, Slag Holes, Shrinkage Cavities, Shrinkage Porosity, Cracks, and Sulfur Porosity. 1. Blowholes (Gas Porosity): The Most Frequent Culprit Blowholes are typically round, oval, or pear-shaped cavities. They may appear on the surface or remain hidden within the casting, often only revealed after machining. Unlike shrinkage or slag holes, their internal walls are usually smooth. Root Cause: “Trapped Gas.” Low Pouring Temperature: Metal oxidation increases, and fluidity drops. High Sand Moisture: Poor permeability prevents steam from escaping. Pouring Speed: Excessively fast pouring creates turbulence, trapping air. Contaminated Charge: Rusty, oily, or damp scrap releases gas during melting. Impact: Compromises strength and air-tightness (critical for valves, pumps, and housings). Control: Focus on reducing gas sources and ensuring clear...
عرض المزيد 
