







Highland Refractory manufactures high-purity ceramic fiber paper (also known as refractory alumina-silicate fiber paper) engineered for high-temperature thermal barriers, die-cut gaskets, and electrical insulation up to 1260°C (2300°F) and 1430°C (2600°F). Produced via an automated continuous wet-forming papermaking process with advanced de-slagging technology (shot content ≤ 8%), our papers deliver outstanding tensile strength, smooth surface finish, and ultra-low thermal conductivity.
Available in continuous rolls and sheets in thicknesses from 0.5mm to 6.0mm (including standard 1/8" and 1/4" inch dimensions). Ideal for industrial furnace flanges, expansion joint fillers, petrochemical pipe wraps, and kiln shelf barrier liners.

Ceramic fiber paper (frequently referred to as ceramic fiber insulation paper or refractory gasket paper) is an ultra-thin, highly flexible refractory sheet manufactured from washed aluminosilicate ceramic fibers. Unlike needle-punched ceramic fiber blankets or thick woven ceramic fiber tapes, ceramic fiber paper is produced using a specialized Fourdrinier-style wet papermaking process.
In this continuous slurry process, raw bulk ceramic fibers undergo multi-stage centrifugal vortex washing to eliminate non-fibrous slag balls (reducing unfiberized shot content to ≤ 8%). The refined fibers are uniformly suspended in an aqueous slurry with precisely metered organic binders and inorganic colloidal agents, then deposited on an acoustic drainage wire mesh, pressed, and thermally dried. The resulting ceramic fiber paper sheet exhibits uniform sheet formation, isotropic tensile strength, smooth surface caliper, and zero asbestos content.
Continuous Ceramic Fiber Paper Roll (0.5mm–6.0mm)
Clean Surface Caliper for Die-Cut Flange Gaskets
High Purity Low-Shot Ceramic Fiber Insulating Matrix
Highland Refractory manufactures three distinct formulations of refractory ceramic fiber paper: Standard 1260 Grade (aluminosilicate system), Zirconia 1430 Grade (for high-temperature petrochemical and crucible environments), and Bio-Soluble Eco Grade (alkaline earth silicate composition for strict industrial hygiene requirements). All production rolls conform strictly to ASTM C795, ISO 5014, and ASTM C356 standards.
| Technical Property / Metric | 1260 Standard Industrial | 1430 High-Alumina / Zirconia | Bio-Soluble Eco Grade |
|---|---|---|---|
| Classification Temperature | 1260°C (2300°F) | 1430°C (2600°F) | 1200°C (2192°F) |
| Continuous Working Temp | 1050°C (1922°F) | 1350°C (2462°F) | 1000°C (1832°F) |
| Nominal Bulk Density | 160 ± 20 kg/m³ (10 lb/cu.ft) | 200 ± 20 kg/m³ (12.5 lb/cu.ft) | 180 ± 20 kg/m³ |
| Tensile Strength (MPa) | ≥ 0.40 MPa | ≥ 0.45 MPa | ≥ 0.35 MPa |
| Chemical Composition (%) | Al&sub2;O&sub3;: 45–47% | SiO&sub2;: 51–53% | Al&sub2;O&sub3;: 35% | SiO&sub2;: 50% | ZrO&sub2;: 15% | CaO + MgO ≥ 32% | SiO&sub2; ≥ 62% |
| Shot Content (Slag Ball >45μm) | ≤ 8.0% (Clean washed) | ≤ 6.0% | ≤ 8.0% |
| Linear Shrinkage (24h soak) | ≤ 2.5% (at 1000°C) | ≤ 2.0% (at 1200°C) | ≤ 2.5% (at 1000°C) |
| Loss on Ignition (LOI, Binder) | ≤ 8.0% (Burnout at >200°C) | ≤ 8.0% | ≤ 9.0% |
| Thermal Conductivity (600°C) | 0.085 W/m•K | 0.092 W/m•K | 0.090 W/m•K |
| Available Thicknesses | 0.5, 1.0, 2.0, 3.0, 5.0, 6.0 mm | 1.0, 2.0, 3.0, 5.0 mm | 1.0, 2.0, 3.0, 5.0 mm |
| Standard Roll Widths | 610 mm, 1000 mm, 1220 mm | 610 mm, 1000 mm | 610 mm, 1000 mm |
| Indicative Factory Price | USD $15.00 – $55.00 / Roll | USD $35.00 – $85.00 / Roll | USD $25.00 – $65.00 / Roll |
*Note: Exact physical dimensions, narrow-slit rolls (e.g. 50mm, 100mm tape slit), and custom die-cut parts are manufactured per customer drawings. Certified Mill Test Reports (MTR) accompany each shipping lot.
The uniform caliper and lack of fiber agglomerations allow Highland ceramic fiber paper to be converted into custom gaskets with tight dimensional tolerances:
Manufactured with ultra-fine refined fibers. Extremely pliable with high dielectric barrier strength, ideal for narrow-gap electronic thermal shields, instrument gaskets, and sensor protection.
The global benchmark thickness for industrial gasketing. Widely recognized as 1 8 ceramic fiber paper (1/8 inch / 3.17mm), providing the perfect balance between compressibility and gas-sealing resilience.
Referred to in heavy metallurgy as 1 4 ceramic fiber arch paper (1/4 inch / 6.35mm). Acts as a resilient cushion and expansion joint filler between rigid refractory brickwork and steel kiln shells.
During the paper wet-forming process, binder selection dictates tensile performance and atmospheric response at elevated temperatures:
Blended with approximately 6% to 8% modified organic latex binders to provide maximum flexibility and tear resistance during die-cutting and roll handling.
Thermal Behavior: Between 200°C and 350°C (392°F–662°F), the organic binder cleanly volatilizes. Once burned off, the pure ceramic fibers retain their refractory insulating capability and structural matrix under mechanical compression.
Manufactured with colloidal silica sol and minimal organic carriers (ceramic fiber paper silica sol binder tensile strength system).
Thermal Behavior: Releases zero smoke, volatile organics, or toxic fumes during initial heat-up. Designed specifically for cleanroom applications, domestic heating appliances, and laboratory furnace chambers where outgassing cannot be tolerated.
Ceramic fiber paper gasket sheets serve as an indispensable high-temperature seal across diverse heavy industrial sectors:
Die-cut into custom rings, oval gaskets, and rectangular frames for heat-treating furnaces, annealing ovens, and petrochemical pipeline flanges. Conforms easily to rough flange faces to prevent hot flue gas leakage.
Serving as kiln shelf ceramic fiber paper (kiln shelf liner) in ceramic and glass fusing kilns. Prevents ceramic glazes or molten glass from sticking to expensive cordierite and silicon carbide kiln shelves.
Used in cement rotary kilns and metallurgical furnace masonry. Placed between refractory brick courses as an expansion buffer that compresses under thermal expansion without cracking bricks.
Used as barrier linings and gaskets in aluminum launders, casting distribution boxes, and zinc tap-out cones in non-ferrous smelting operations. Non-wetting to molten aluminum alloys.
To ensure optimal service life and prevent thermal bypassing, field maintenance technicians should observe these engineering guidelines:
Highland ceramic fiber paper can be cleanly die-cut using standard steel rule dies, rotary punch presses, or waterjet cutting tables. For on-site field installation, use a fresh razor utility knife against a steel straightedge. Avoid tearing or shearing by hand, which frays fiber boundaries and disrupts sealing integrity.
Unlike rigid rubber or graphite sheets, ceramic fiber paper is a fibrous compressible matrix. Recommended nominal gasket seating stress is 10 to 20 MPa. Do not overtighten bolts beyond yield strength, as over-compression crushes the microscopic fiber structure, reducing insulating efficacy.
Highland Refractory applies rigorous export-grade protective packaging to ensure paper rolls arrive completely dry, clean, and free from core collapse:
Tiered Wholesale Pricing: Factory direct pricing scales from USD $15.00/roll for standard 0.5mm–1.0mm thin paper up to USD $85.00/roll for heavy 5.0mm–6.0mm zirconia-stabilized grades. Substantial volume discounts apply to full container load (20GP / 40HQ) bulk procurement orders.
Industrial Production Lead Time: Standard specification rolls (610mm / 1000mm width, 1mm–5mm thickness) are scheduled within our normal manufacturing queue with a realistic export lead time of 30–40 working days. Custom die-cut gaskets, specialized inorganic silica sol formulations, or narrow-slit coils require 40–50 working days for comprehensive batch inspection and packaging.
Wound on Rigid Cardboard Core with Moisture Barrier
Uniform Caliper Inspection Prior to Maritime Export
ISPM-15 Fumigation-Free Export Pallet Staging
Need custom slit widths, specialized die-cut gasket components, or certified material test reports (MTR) for your industrial furnace project? Highland Refractory provides direct factory pricing, complimentary testing samples, and global container logistics support.
Aluminum content 75%-80% Refractory 1770℃ or above
Silicon carbide plates are mainly composed of silicon carbide (SiC) as the aggregate (with a content usually ≥ 80%).