The stainless Tz series slag agglomerator is non-toxic and odorless, free of harmful components. It's suitable for slag removal in iron water and does not produce dust or pollute the environment. It has high dispersion, good slag agglomeration performance, fast bonding speed, good film-forming properties, and quick slag removal.
1. Iron ladle: After filling the molten iron ladle with molten iron, take an appropriate amount of this product and sprinkle it on the surface to quickly adhere the floating slag on the surface of the molten iron. Use a slag removal plate to remove the floating slag in one go.
2. Fan shaped ladle: When the fan-shaped ladle is filled with molten iron, sprinkle an appropriate amount of product on the surface, quickly remove it with an iron rake, and then evenly sprinkle an appropriate amount of product on the surface to form a protective film before pouring.
3. When the iron water in the induction furnace is heated to the slag removal temperature, take an appropriate amount of this product and sprinkle it into the furnace. Then, use a garbage stick or iron rod to remove it. The product can remove the slag and oxide on the surface of the iron.
The stainless Tz series slag agglomerator is non-toxic and odorless, free of harmful components. It's suitable for slag removal in iron water and does not produce dust or pollute the environment. It has high dispersion, good slag agglomeration performance, fast bonding speed, good film-forming properties, and quick slag removal.
This product uses an adsorption mechanism based on cohesive bonding. It has a high heat-resistant degree, does not melt itself, and does not produce secondary slag. The film formed on the iron water surface not only adsorbs and blocks molten slag but also has excellent insulation properties, effectively preventing iron water oxidation.
It's used for covering and insulating sand mold risers in steel castings and investment casting risers. Its appearance is a reddish-brown powder, non-toxic and odorless, with no harmful components.
|
Main Chemical Composition |
|||||
|
SiO2 |
AI2O3 |
Fe2O3 |
Na2O |
CaO |
K2O |
|
≥68 |
≥10 |
≥0.6 |
≥2.5 |
≥0.3 |
≥2.5 |
|
Physical Properties |
|||
|
Density g/cm3 |
Expansion Temperature℃ |
Expansion Multiplier |
Moisture Content% |
|
≥1.2 |
1300-1400 |
>5.0 |
≤0.4 |
Highland Refractory categorizes TZ Series Slag-Coagulating Agent by application scenarios to fit diverse metallurgical needs, including TZ-101 (for steel ladles to coagulate alkaline slag), TZ-202 (for continuous casting tundishes to handle fine slag particles), and TZ-303 (for non-ferrous metal smelting ladles, adapting to acidic slag). Each TZ Series Slag-Coagulating Agent uses slag-modifying components, enabling rapid solidification of molten slag upon addition.
Highland’s TZ Series Slag-Coagulating Agent offers key strengths: it quickly turns molten slag into loose, easy-to-remove lumps (cutting slag cleaning time by 40%), prevents slag from seeping into refractory linings, and contains no harmful additives—avoiding steel or non-ferrous metal contamination to ensure product quality.
TZ Series Slag-Coagulating Agent is mainly used in metallurgy: in steel production, it is added to steel ladles and tundishes to manage slag; in non-ferrous smelting (copper, aluminum), it coagulates acidic slag; it also aids casting processes by removing slag from molten metal surfaces, ensuring clean pouring.
TZ Series Slag-Coagulating Agent focuses on rapid solidification of molten slag (critical for slag separation and lining protection in ladles/tundishes), while TZ-M1 Riser Exothermic Covering Agent specializes in heat preservation and shrinkage compensation for casting risers (prioritizing maintaining molten metal temperature to avoid casting defects).
Highland Refractory is your best TZ Series Slag-Coagulating Agent manufacturer, with 30+ years of refractory expertise, ISO 9001/CE certification, and 60,000-ton annual capacity. It serves 1,500+ global clients and conducts strict tests (slag coagulation speed, metal contamination) to ensure reliable performance of TZ Series Slag-Coagulating Agent.
Choosing Highland Refractory for TZ Series Slag-Coagulating Agent means customized formulations (per slag type/process), fast delivery (3–7 days in stock, 10–15 days for custom), bulk discounts (5–10% off orders ≥5 tons), free samples, and 24/7 technical guidance—supporting smooth metallurgical operations.
A: Yes, we do offer free samples of our TZ Series Slag - Coagulating Agent. You only need to cover the shipping cost to your address. For customized TZ Series Slag - Coagulating Agent with special properties like enhanced coagulation speed for specific slag types, a small charge may apply, but it will be refunded if you place a large order later.
A: If you order our standard TZ Series Slag - Coagulating Agent that is in stock, you can expect delivery within 3 - 7 days. However, for customized TZ Series Slag - Coagulating Agent designed for unique metallurgical processes or different slag compositions, it will take 10 - 15 days as we need extra time for production and quality checks. For large - scale bulk orders, we will work with you to determine a suitable delivery schedule.
A: Our TZ Series Slag - Coagulating Agent is carefully packaged. It is first sealed in moisture - proof bags to prevent any moisture from affecting its coagulation performance. These bags are then placed in sturdy cardboard boxes or metal drums depending on the quantity. The containers are clearly labeled with handling instructions such as "Keep Dry", "Handle with Care" and all the relevant product details.
A: We accept T/T (Telegraphic Transfer) and PayPal for payments. Similar to our other products, we require full payment before we dispatch the TZ Series Slag - Coagulating Agent. We are constantly exploring additional payment options to make it more convenient for our customers.
A: Absolutely. Every batch of TZ Series Slag - Coagulating Agent we produce undergoes strict quality control. You will receive a detailed quality inspection report that includes information about its chemical composition, coagulation speed for different slag types, and its impact on metal purity. This report will give you confidence in the quality of the product you are purchasing.
A: We are sorry if you receive damaged TZ Series Slag - Coagulating Agent. Please contact our customer service immediately and provide photos and a detailed description of the damage. We will promptly arrange to replace the damaged product with a new, undamaged batch at no extra cost to you.
Applicable to gray cast iron, ductile cast iron, and malleable cast iron, appearing...
Sand mold sprue of cast steel and cast iron, sprue of molten mold casting, appearance...
Plastic is an amorphous refractory material used in hot metal ladle.
A specialized, advanced refractory material designed specifically for foundry enterprises' steel...
