Industrial Monolithic Refractories
High Alumina Powder
High Alumina Powder
High Alumina Powder
High Alumina Powder
High Alumina Powder
High Alumina Powder

High Alumina Powder

High Alumina Powder (calcined bauxite fine powder) is the backbone of the alumina refractories industry. Categorized as refractory alumina, it is defined by its alumina-to-impurity ratio, where 85 alumina (grade ≥85% Al2O3) serves as the primary additive for high-temp structural components.

Highland Refractory provides premium-grade calcined powders produced through multi-stage grinding and magnetic separation, ensuring that every batch meets the strict requirements for high alumina mortar and monolithic castable formulations. 

1. Defining High Alumina Powder in Alumina Refractories

In high-temperature kiln and furnace engineering, the "matrix phase" of the refractory is what usually fails first. High alumina powder acts as this matrix, filling the voids between larger bauxite or corundum aggregates. By using high-purity 85 alumina, manufacturers can ensure the final product has high refractoriness under load and exceptional resistance to acidic or basic slag penetration. Our refractory alumina is sourced from high-density calcined bauxite, ensuring zero residual shrinkage during second-stage sintering.

Technical grades of high alumina powder used in industrial alumina refractories.

2. Standard Technical Specifications: 80% to 90% Alumina

The chemical composition of high alumina powder determines its service temperature ceiling and chemical stability. For the majority of steel and cement applications, 85 alumina represents the optimal balance between high refractoriness and procurement cost efficiency.

Property Grade 80 Grade 85 Alumina Grade 90 (Super)
Al2O3 Content (%) ≥ 80% ≥ 85% ≥ 88.5%
Fe2O3 (Max %) ≤ 1.8% ≤ 1.5% ≤ 1.2%
TiO2 (Typical %) 3.0 – 3.8% 3.2 – 4.0% 3.5 – 4.2%
Bulk Density (g/cm³) ≥ 3.10 ≥ 3.30 ≥ 3.50
Refractoriness (°C) 1770 1790 1850
Moisture (Max %) 0.5% 0.5% 0.3%

3. Particle Size Distribution: From 100 to 1000 Mesh

The "mesh size" of refractory alumina powder determines its reactivity and mixing homogeneity. Highland Refractory utilizes advanced ball-milling technology to provide standardized and custom fractions:

  • 200 Mesh (75μm): Standard grade for ramming masses and general refractory brick formulations.
  • 325 Mesh (45μm): The preferred fineness for high alumina mortar and monolithic castables, ensuring a smooth, air-setting bond.
  • 1000 Mesh (13μm): Super-fine powder used as an additive in precision technical ceramics and high-end glazes to improve surface density.

4. Applications: Formulating High Alumina Mortar & Castables

Highland’s high alumina powder is the key ingredient in a wide array of alumina refractories:

  • High Alumina Mortar: Our 325-mesh 85 alumina powder provides the high-temp bonding strength required to secure bricks in furnace arches.
  • Investment Casting: Used as a refractory wash or stucco material to provide high-precision surface finishes in metallurgical casting.
  • Wear-Resistant Coatings: Combined with binders to create protective coatings for high-velocity gas ducts and cyclones in cement plants.

5. Why Chemical Purity (Fe2O3 < 1.5%) Matters

In a reducing atmosphere, such as in a petrochemical reformer or a blast furnace, iron oxide (Fe2O3) acts as a catalyst for carbon monoxide disintegration. This leads to the "bloating" and eventual powdering of the refractory lining. Highland Refractory utilizes high-intensity magnetic separators to ensure our 85 alumina powder has iron levels strictly under 1.5%, guaranteeing the chemical longevity of your alumina refractories in aggressive furnace environments.

High Alumina Powder Sourcing FAQ

What is the difference between Grade 85 and Grade 90 powder?
Grade 85 is the industry standard for most ladle and furnace linings. Grade 90 (Super) contains higher alumina and lower iron, making it more resistant to ultra-high temperatures (>1800°C) and aggressive basic slags.
Can I use this powder to repair cracks in my furnace?
Yes. By mixing 325-mesh 85 alumina powder with a binder (like phosphoric acid or refractory cement), you can create a customized high alumina mortar for onsite patch repairs.
How is the powder packaged for international shipping?
We use multi-layer, moisture-proof paper bags (25kg or 50kg), which are then loaded into 1.0 - 1.5 MT big bags on IPPC fumigated pallets to ensure the powder remains dry during transit.
What is the typical lead time for customized mesh sizes?
Standard 200/325 mesh is usually in stock. Custom 1000-mesh or specialized fractions typically require 10-15 working days for production and air-classification.

Need Certified 85 Alumina Powder?

Get direct factory pricing on high-purity refractory alumina and mortar components. Batch XRF reports included.

Request 2026 Quote & Samples →

Send Message If you need our products please write down any questions, we will reply as soon as possible.

    Related Products

    Clay Powder

    Clay powder is a powdery material with clay minerals as the main component.

    Refractory Cement

    Refractory Cement (CA50, CA70, CA80 High-Temp Binders)

    Refractory cement, also known as aluminate cement, is a fire-resistant hydraulic cementitious material.

    Steel Fiber Castable

    Steel Fiber Castable

    Steel fiber wear-resistant castables are widely used in high temperature and wear-resistant environments in many industrial fields such as metallurgy, building materials, and chemicals.

    Corundum Castable

    Corundum Castable

    White corundum castable is a high-quality high-temperature refractory material with high-purity alumina powder as the main raw material.

    High Alumina Castable

    High Alumina Castable

    High Alumina Castable refers to a refractory castable with Al2O3 content greater than 48%.

    Low Cement Castable

    Low cement castable refers to castable with low cement content.

    Lightweight Insulating Castable

    Lightweight Insulating Castable

    Lightweight ‌ insulation castable is a refractory with low density and excellent insulation properties.

    Corundum Mullite Castable

    Mullite Castable

    Corundum mullite castable is a high-quality high-performance refractory material with high thermal conductivity, insulation, good chemical stability and resistance to reducing agents.

    Silicon Carbide Powder

    Silicon Carbide Powder

    Silicon carbide castable is an amorphous refractory material with silicon carbide as the main component.

    Chrome Corundum Castable

    Chrome Corundum Castable

    Chrome corundum castable is a high-performance amorphous refractory material composed of corundum and chromium. It has high melting point, high hardness, high stability and excellent slag resistance and wear resistance.

    High Alumina Refractory Cement

    High Alumina Cement

    high alumina cement is a powder material with alumina (Al2O3) as the main component.

    Plastic Refractory

    Plasticity Refractory

    Plastic is an amorphous refractory material in the form of hard mud and has high plasticity.

    Refractory Spraying Material

    Refractory spray coating is a kind of amorphous refractory material, which is applied to the lining of thermal equipment by spraying construction method.

    Dry Impermeable Material

    Widely used in a variety of furnace front package, transfer package, ladle insulation layer...

    Refractory Raw Material

    Widely used in a variety of furnace front package, transfer package, ladle insulation layer...

    High-Temperature Refractory Repair Materials for Industrial Furnaces & Kilns

    High temperature and high strength repair material is a special material used to repair equipment and structures in high temperature environments.

    Ladle Coating

    Lining coating is a functional material used on the surface of high-temperature equipment or facilities...

    Insulating Coating

    Used for insulation and heat preservation of the ladle walls in the operation of cast iron...

    Steel Ladle Castable

    A new type of ladle castable has been developed to address the current situation of steel ladle...

    Anti-Slag Coating for Ladle Linings

    A specialized, advanced refractory material designed specifically for foundry enterprises' steel...

    Plastic Refractory for Iron Ladle

    Plastic is an amorphous refractory material used in hot metal ladle.

    TZ Series Slag-Coagulating Agent

    The stainless Tz series slag agglomerator is non-toxic and odorless, free of harmful components.

    Refractory Castable

    Low cement castable refers to castable with low cement content.

    Fire Clay Powder

    Fire Clay Powder

    Clay powder is a powdery material with clay minerals as the main component.

    High Alumina Powder

    High alumina fine powder is a powder material with alumina (Al2O3) as the main component.

    Home Tel Mail Inquiry

    Send Message